M8000 Series of BER Test Solutions Tips for Preventing Damage 7
Tips for Preventing Damage 1
64G Head M8058A/M8052A and M8067A-001/-002 connectors and short cable
Tools required to connect/disconnect the cable
• 54964-03802 Counter Wrench: 1.5 mm thick, dual-ended, fits 8 mm
• 8710-1765 Torque Wrench: 8lb-in, 5/16 Inch
Table 3 Steps to connect / disconnect the cables
Steps to be performed Reference image of the cable
Connecting the cables
Use the 54964-03802 wrench to hold
at position 1. Avoid turning inner pin.
Use 8710-1765 wrench to torque /
tighten at position 2.
Disconnecting the cables
Use the 54964-03802 wrench to hold
at position 1. Avoid turning inner pin.
Use 8710-1765 wrench to loosen at
position 2.
To Next Page
Loading...
