Synchronization Operation 112
Programming Output Lists 113
Output Lists 113
Program an Output Pulse or Pulse Train 114
Program an Arbitrary List 116
Generating Arbitrary Waveforms 119
Arbitrary Waveform Description 119
Configuring Step Arbs 120
Configuring Pulse Arbs 120
Configuring Ramp Arbs 121
Configuring Trapezoid Arbs 122
Configuring Staircase Arbs 123
Configuring Exponential Arbs 124
Configuring Sinusoid Arbs 124
Configuring Constant-Dwell Arbs 125
Configuring an Arb Sequence 126
Configuring User-Defined Arbs 128
Configuring Steps Common to all Arbs 128
Running the Arb 129
Making Measurements 131
Basic DC Measurements 131
Measurement Ranges 131
Seamless Measurements 132
Simultaneous Measurements 132
Auxiliary Voltage Measurements 132
Using the Digitizer 134
Measurement Types 134
Programming the Digitizer 135
Synchronizing Digitizer Measurements 139
External Data Logging 144
Data Logging Functions 144
Select the Measurement Function and Range 144
Specify the Integration Period 145
Select the Elog Trigger Source 146
Initiate and Trigger the Elog 147
Periodically Retrieve the Data 147
Terminate the Elog 148
Using the Digital Control Port 149
Bi-directional Digital IO 149
Digital Input 150
External Trigger I/O 150
Fault Output 151
Inhibit Input 151
Fault/Inhibit System Protection 152
Output State 153
Using the Protection Functions 154
Protection Functions 154
Set the Over-Voltage Protection 155
5 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
