Need help?Do you have a question about the Keysight N6701C and is the answer not in the manual?
General| Type | Modular Power System Mainframe |
|---|---|
| Number of Outputs/Slots/Channels | 4 slots |
| Voltage Range | Depends on installed module |
| Current Range | Depends on installed module |
| Output Power per Channel | Depends on installed module |
| Interface | GPIB, LAN (LXI Core), USB |
| Voltage Resolution | Depends on installed module |
| Current Resolution | Depends on installed module |
| Voltage Programming Accuracy | Depends on installed module |
| Current Programming Accuracy | Depends on installed module |
| Ripple and Noise (20 Hz to 20 MHz) | Depends on installed module |
| Transient Response (50% Load Change) | Depends on installed module |
| Maximum Power | 300 W total (100 W per slot) |
Covers copyright, edition, publisher, and warranty information for the manual.
Explains various warning and caution symbols used throughout the document.
Details general safety precautions for operating the instrument.
Step-by-step guide for installing the mainframe and its modules.
Guide to operating the instrument using its front panel controls.
Covers setting voltage, current, resistance, power, and output modes.
Covers over-voltage, over-current, and other protection settings.
Explains SCPI command types, keywords, syntax, and parameters.
Lists and explains SCPI error codes and messages for troubleshooting.
Lists required test equipment and describes setup procedures.
Details tests to verify normal operation and specifications.
Provides procedures for calibrating individual power modules.
Instructions for updating the instrument's firmware.
Covers ESD precautions, disassembly procedures, and tools.
Guides for diagnosing and resolving instrument issues.
To Next Page
