l The configurable services include: VXI-11, Telnet, Web control, Sockets, mDNS, and HiSLIP.
l You must enable Web control if you wish to remotely control your instrument using its built-in Web
interface.
Using the Web Interface
Your power system has a built-in Web interface that lets you control it directly from the Web browser
on your computer. With the Web interface, you can access the front panel control functions including
the LAN configuration parameters. Up to six simultaneous connections are allowed. With multiple
connections, performance will be reduced.
The built-in Web interface only operates over the LAN. It requires a Web browser. You
also need the Java Plug-in version 7+. This is included in the Java Runtime
Environment.
The Web interface is enabled when shipped. To launch the Web interface:
1. Open the Web browser on your computer.
2. Enter the instrument’s hostname or IP address into the browser’s Address field. The following
home page will appear.
3. Click on the Control Instrument tab on the top of the page to begin controlling your instrument.
4. For additional help about any of the pages, click on the ? icon on the top of the page.
If desired, you can control access to the Web interface using password protection. As shipped, no
password is set. To set a password, click Log In on the top of the page. Refer to the on-line help for
additional information about setting a password.
3 Getting Started
90 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
