Safety Symbols
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to, could result in personal injury or DEATH. Do not
proceed beyond a WARNING notice until the indicated conditions are fully understood and met.
A CAUTION notice denotes a hazard. It calls attention to an operating procedure, practice, or the
like that, if not correctly performed or adhered to, could result in damage to the product or loss of
important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
Direct current
Alternating current
Frame or chassis terminal
Standby supply. Unit is not completely disconnected from AC mains when switch is off.
Risk of electric shock
Refer to accompanying documents
Earth ground terminal
The CE mark is a registered trademark of the European Community.
The ETL mark is a registered trademark of Intertek.
The RCM mark is a registered trademark of the Spectrum Management Agency of Australia.
South Korean Class A EMC Declaration
This equipment has been conformity assessed for use in business environments. In a residential environment this
equipment may cause radio interference. This EMC statement applies to the equipment only for use in business
environments.
Contains one or more of the 6 hazardous substances above the maximum concentration value (MCV), 40 Year
EPUP.
ISM1-A This text indicates that the instrument is an Industrial Scientific and Medical Group 1 Class A product (CISPER
11, Clause 4).
ICES/NMB-001 This text indicates product compliance with the Canadian Interference- Causing Equipment Standard (ICES-
001).
Legal and Safety Information
11 Keysight N6700C Operating and Service Guide
To Next Page
Loading...
