Keysight i3070 In-Circuit Test System
N67xx DUT Power Supply Installation
N67xx DUT Power Supply
Overview 1-2
Installing the DUT Power Supply 1-4
Connecting the Output Cables 1-6
Setting Up Fault/Inhibit System Protection 1-19
Connecting the Power and GPIB Cables 1-25
Updating the Configuration Files 1-28
Verifying Operation 1-30
This guide describes the installation of the N67xx DUT power supplies in the i3070
Series 6 test systems (2- or 4-module).
The procedures in this document must be performed by
personnel who are trained and qualified to service Keysight
systems.
To Next Page
Loading...
