Electronic Calibration Modules Reference Guide 1-7
General Information
Models and Options
N4431D Modules (RF Four-Port)
ECal modules from this series are available with the connector types and
frequency ranges shown in Table 1-1 on page 1-6. Mixed connector options
allow you to configure the module with a different connector type at each port
(as shown in Figure 1-2 on page 1-5).
Figure 1-3 Model N4431D Option Type-N m and f shown
Figure 1-4 Model N4431D Option 3.5 mm f and f shown
To Next Page
Loading...
