Electronic Calibration Modules Reference Guide 6-3
Replaceable Parts
1.85 mm Modules and Accessories
1.85 mm Modules and Accessories
Table 6-2 1.85 mm Modules and Accessories
Description
a
a. See “Clarifying the Terminology of a Connector Interface” on page 1-1.
Qty Part Number
Adapters (added with Option 00A – N469xD only)
1.85 mm -f- to -f- adapter
1.85 mm -m- to -m- adapter
1
1
85058-60114
85058-60113
Protective End Caps
1.85 mm -f- connector cap (for adapter)
b
1.85 mm -m- connector cap (for adapter)
b
b. These items are not included, but can be ordered separately.
as required
as required
1401-0202
1401-0208
Gages
b
2.4 mm -f- pin-depth gage
c
2.4 mm -m- pin-depth gage
c
c. A 2.4 mm gage is capable of measuring 2.4 mm and 1.85 mm connectors.
1
1
11752-60607
11752-60108
Other
Electronic calibration module reference guide (online)
USB cable A to B, 2 meter
1/2 in to 9/16 in open-ended wrench
b
20 mm, 90 N-cm (8 in-lb) torque wrench
b
5/16 in, 90 N-cm (8 in-lb) torque wrench
b
Spanner wrench
b
Replacement ruggedized plastic storage box for the ECal module and
accessories
d
d. This item is included, but a replacement can be ordered separately.
1
1
1
1
1
1
1
N7550-90002
8121-2671
8710-1770
8710-1764
8710-1765
08513-20014
1540-2345 – Refer to
Table 1-4,
“N469xD
Modules”, on
page 1-13.
To Next Page
Loading...
