3-10 Electronic Calibration Modules Reference Guide
Operating ECal Module
Finding More Information on Performing a Calibration
3-
Finding More Information on Performing a Calibration
For detailed information on performing a calibration using an PNA or PXIe
series or the FieldFox, refer to the appropriate user guide or online Help.
— To view the PNA or PXIe Help file that is embedded in the analyzer, press
the Help key on the front panel of the network analyzer.
— To view a user guide or Help file on the Internet, use the following steps:
1. Go to www.keysight.com.
2. Enter your analyzer model number (Ex: N5242A) in the search function and
click Search.
3. Click on the Manuals hyperlink.
4. Open the PDF of the User Guide or Help.
Do not perform a calibration procedure unless you have cleaned and
visually inspected all connectors and have taken the necessary ESD
precautions.
To Next Page
Loading...
