Keysight N7550A - Page 30

1-22 Electronic Calibration Modules Reference Guide
General Information
Compatible Network Analyzers
1-
d. Compatible ENA E5071C instruments must have firmware version ≥B.14.0x.
(ENA E5061B, E5063A, E5071C, and E5072A series analyzers are not
compatible with the N4693D and N4694D ECals.)
e. Compatible ENA E5063A instruments must have firmware version ≥A.05.04.
(ENA E5061B, E5063A, E5071C, and E5072A series analyzers are not
compatible with the N4693D and N4694D ECals.)
f. Compatible ENA E5061B instruments must have firmware version ≥B.05.00.
(ENA E5061B, E5063A, E5071C, and E5072A series analyzers are not
compatible with the N4693D and N4694D ECals.)
g. Compatible ENA E5080A instruments must have firmware version
≥A.12.60.0x.
h. ENA E5080A instruments have no restrictions on firmware revision.
i. Compatible M9370/1/2/3/5A and M9485A PXIe instruments must have
firmware version ≥A.12.60.0x.
N980xA PXIe instruments have no restrictions on firmware revisions.
j. Streamline Series USB-VNA instruments have no restrictions on firmware
revision.
k. Compatible FieldFox Handheld instruments must have firmware version
≥A.10.2x (CPU2 units) and ≥A.08.19 (CPU1 units).
l. The N9912A FieldFox does not support ECal.