4-4 Electronic Calibration Modules Reference Guide
Use, Maintenance, and Care of the Devices
Visual Inspection
4-
Figure 4-2 Type-N Connector Pin Depth and Mating Surfaces
Light burnishing of the mating plane surfaces is normal, and is evident as light
scratches or shallow circular marks distributed more or less uniformly over the
mating plane surface. Other small defects and cosmetic imperfections are also
normal. None of these affect electrical or mechanical performance. If a
connector shows deep scratches or dents, particles clinging to the mating
plane surfaces, or uneven wear, clean and inspect it again.
To Next Page
Loading...
