Keysight Streamline Series - Keysight Streamline Series Vector Network Analyzer Configurations; Test Set Options; Hardware Options

4
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Find us at www.keysight.com Page 4
Keysight Streamline Series Vector Network Analyzer Configurations
Model Description Test port connectors
P937xA Series
P9370A
300 kHz to 4.5 GHz, 2-port
3.5 mm (f)
P9371A
300 kHz to 6.5 GHz, 2-port
3.5 mm (f)
P9372A
300 kHz to 9 GHz, 2-port
3.5 mm (f)
P9373A
300 kHz to 14 GHz, 2-port
3.5 mm (f)
P9374A
300 kHz to 20 GHz, 2-port
3.5 mm (f)
P9375A
300 kHz to 26.5 GHz, 2-port
3.5 mm (f)
P500xA Series
P5000A
9 kHz to 4.5 GHz, 2-port
3.5 mm (f)
P5001A
9 kHz to 6.5 GHz, 2-port
3.5 mm (f)
P5002A
9 kHz to 9 GHz, 2-port
3.5 mm (f)
P5003A
9 kHz to 14 GHz, 2-port
3.5 mm (f)
P5004A
9 kHz to 20 GHz, 2-port
3.5 mm (f)
Test set options
Choose one of the frequency models, and one test set option for the P500xA Series. Option 2xx indicates
two test ports. To add options to a product, order the corresponding item number (P500xA-xxx).
Description 2-port
Additional information
P500xA Series
Option 200
・
Not available for the P937xA Series
Hardware options
Description
For P937xA
Series
For P500xA
Series
Additional information
Add pulse modulation
hardware
N/A P500xA-021
This option enables the internal pulse modulator
on the analyzer’s source. S97025A application
software is required for pulsed-RF
measurements.
Add spectrum analysis
hardware
N/A P500xA-090
S97090A application software is required for
spectrum analysis.