Keysight Streamline Series - Verification Kits; PC Requirements for USB VNA Control

Ihr Spezialist für
Mess- und Prüfgeräte
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Find us at www.keysight.com Page 24
Verification kits
All Keysight verification kits include:
•
Precision Z0 airline or match thru
•
Mismatched airline or mismatch thru
•
Fixed attenuators (except 85059V)
•
Traceable measured data and uncertainties
85051B 45 MHz to 18 GHz 7 mm kit
Includes attenuators, airline and mismatch airline with data on a USB drive for use in confirming
calibrated system performance, traceable to national standards. Test procedure is provided in the service
manual.
85053B 300 kHz to 26.5 GHz 3.5 mm kit
Includes attenuators, airline and mismatch airline with data on a USB drive for use in confirming
calibrated system performance, traceable to national standards. Test procedure is provided in the service
manual.
85055A 300 kHz to 18 GHz Type-N kit
Includes attenuators, airline and mismatch airline with data on a USB drive for use in confirming
calibrated system performance, traceable to national standards. Test procedure is provided in the service
manual.
85057B 45 MHz to 50 GHz 2.4 mm kit
Includes attenuators, airline and mismatch airline with data on a USB drive for use in confirming
calibrated system performance, traceable to national standards. Test procedure is provided in the service
manual.
85058V 45 MHz to 67 GHz 1.85 mm kit
Includes attenuators, match thru and mismatch thru with data on a USB drive for use in confirming
calibrated system performance, traceable to national standards. Test procedure is provided in the service
manual.
Find us at www.keysight.com Page 25
Learn more at: www.keysight.com
For more information on Keysight Technologies’ products, applications or services,
please contact your local Keysight office. The complete list is available at:
www.keysight.com/find/contactus
This information is subject to change without notice. © Keysight Technologies, 2019, Published in USA, February 12, 2019, 5992-2823EN
PC Requirements for USB VNA control
Requirement For P937xA Series
Operating Systems
Windows 7 or Windows 10 (64-bit)
Processor Speed
Intel i5 6
th
generation or newer/Intel Xeon E3 v3 or newer
Available Memory
4 GB minimum, 16 GB recommended
Available Disk Space
2 GB available disk space minimum
Display Resolution
1024 X 768 minimum
USB
USB 3.0 port directly connected to Intel chipset
Literature Information
Keysight P937xA Series USB Vector Network Analyzer – Data Sheet, 5992-2765EN
Keysight P500xA Series USB Vector Network Analyzer – Data Sheet, 5992-3606EN
Keysight Vector Network Analyzer – Selection Guide, 5980-7603EN
Electric Calibration (ECal) Modules – Technical Overview, 5963-7343E
Web Resources
www.keysight.com/find/usb-vna
www.keysight.com/find/na
www.keysight.com/find/ecal
Änderungen und Irrtümer vorbehalten. dataTec 14-02-2019 | © Keysight Technologies: 5992-2823EN | February 12, 2019