Keysight Streamline Series - Application Software; Calibration Options

5
dataTec ▪ Ferdinand-Lassalle-Str. 52 ▪ 72770 Reutlingen ▪ Tel. 07121 / 51 50 50 ▪ Fax 07121 / 51 50 10 ▪ info@datatec.de ▪ www.datatec.de
Find us at www.keysight.com Page 5
Application software
1
Description
For P937xA
Series
For P500xA
Series
Additional information
Automatic fixture removal
S97007A
S97007A
Time domain analysis
S97010A
S97010A
Basic pulsed-RF
measurements
N/A S97025A
Requires hardware option 021.
Noise figure measurements
with vector correction
N/A S97029A
Standard receivers are used.
Scalar mixer/converter
measurements
S97082A S97082A
Provides ability to independently set
the frequency of internal sources and
receivers, and to configure external
sources. Provides SMC measurement
class.
Embedded-LO capability
N/A
S97084A
Gain-compression
measurements
N/A S97086A
Spectrum analysis
N/A
S97090A
Requires hardware option 090.
Multiport calibrated
measurements
S97551A S97551A
Provides multiport calibrated
measurements using up to two
instruments.
2,3,4
Calibration options
Description
For P937xA
Series
For P500xA
Series
Additional information
ISO 17025 compliant
calibration
P937xA-1A7 P500xA-1A7
ANSI Z540 compliant
calibration
P937xA-A6J P500xA-A6J
Commercial calibration
certificate with test data
P937xA-UK6 N/A
1. Supported software license types: node-locked perpetual (1FP), node-locked 12 month (1FL). 1FP is the only
type that can be ordered as part of the instrument. The other types have to be ordered as separate items and
installed from the web aster the receipt of the instruments.
2. When configuring a multiport VNA using multiple USB VNAs, the Y1710A is recommended for each additional
multiport interconnection.
3. The P937xA and P500xA can not be combined in multiport configurations.
4. A 4-port ECal module (i.e. N4431/32/33) is recommended for multiport measurements (n > 4).