Keysight U1610/20A Quick Start Guide 11
Set the Date and Time
Press > > . Press
any softkey and use the or key to change
the values.
Set the Language
Press > > and use
the keys to select the language.
Press again to exit the selection menu.
Reset the Oscilloscope
Press > .
is only accessible when in the Scope
mode.
Before resetting to factory default settings, you may
want to save the current handheld scope
configuration for later use by pressing >
.
For details on using the oscilloscope functions, see
the User’s Guide.
To Next Page
Loading...
