Keysight U1733C - Changing Power-On Secondary Parameter (Capacitance)

3Setup Options
74 Keysight U1731C/U1732C/U1733C User’s Guide
Changing the power-on secondary parameter and measurement mode
for capacitance (C) measurements
Use this Setup item to change the capacitance (C) measurement’s initial
secondary parameter — dissipation factor (D), quality factor (Q), or phase angle (θ)
— and measurement mode — parallel or series.
The capacitance (C) measurement will start up using the selected secondary
parameter and measurement mode for subsequent power cycles.
Figure 3-4 Changing the power-on secondary parameter and measurement
mode for capacitance (C) measurements
Press
Press
Press
Press
Press
Press
Press
Press