Keysight U1733C - Changing the Parity Check; Figure 3-11 Changing the Parity Check

Setup Options 3
Keysight U1731C/U1732C/U1733C User’s Guide 83
Changing the parity check
This setting is used with the IR communication link and the Keysight GUI Data
Logger software to control your LCR meter remotely (page 25).
Use this Setup item to change the parity check for remote communications with a
PC.
Figure 3-11 Changing the parity check
Parameter Range Default setting
PAr nonE, En, or odd nonE
Press
Press
Press
Press