1 Getting Started Tutorial
22 Keysight U3402A User’s and Service Guide
Adjusting the Handle
To adjust the handle, grasp the handle by the side and pull outward. Then, rotate
the handle to the desired position. Figure 1-2 below shows the possible
handle positions.
Figure 1-2 Type of handle position
To attach or detach the handle, rotate the handle upright and pull it out from the
sides of the multimeter. Refer to Figure 1-3.
Figure 1-3 Attaching and detaching the handle.
Benchtop
position
Carrying position
Handle removal position
To Next Page
Loading...