EasyManua.ls Logo

Kguard 4CH DVR - Time Setup and Hard Disk Management

Kguard 4CH DVR
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Quad Camera DVR
16
Press the
MENU button to confirm and exit.
4.12 Sub Menu – Time Setup
The systems time and date can be setup within this sub menu.
Use the Ç / S UP and È / T DOWN buttons to move the prompt and press the
SEL button to change the entry. When finished press the MENU button to confirm
and exit.
4.13 Hard Disk Setup
This menu option shows information about the Hard Drive which is installed in the
system and also allows you to choose whether Overwrite is enabled.
Overwrite Enabled:
If this is set to YES, then when the Hard Drive becomes full, the video recording will
loop over and start recording over the earliest recorded data on the disk.
If set to NO then recording will stop as soon as the Hard Drive becomes full.
Digital Video Recorder

Related product manuals