KI Balance - Cabinet Placement and Securing

Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
7
Balance
®
Overhead Cabinet
Assembly Instructions
Upmount Bracket-cont.
2. Carefully position Balance cabinet
on top of brackets, aligning the two
oblong slots of the bracket with the
threaded holes of the cabinet
(Figure 6).
3. Insert and tighten all four
5
/
16
-18 x
3
/
4
” screws.
WireWorks
Panel
Figure 6
53
/ -18 x /
16 4
"
screws
Balance
overhead cabinet
upmounting
bracket