81
8
8
Maintenance Light bulbs
Replacing stop lamp / tail and stop
lamp (LED type) (rear combination
lamp type B)
If the stop lamp (1) or tail and stop
lamp (2) does not operate, we rec
ommend that the system be
checked by a professional workshop.
Kia recommends to visit an autho
rized Kia dealer/service partner.
The LED lamps cannot be replaced
as a single component because it is
an integrated unit. The LED lamps
have to be replaced with the unit.
A skilled technician should check or
repair the LED lamps, for it may
damage related parts of the vehicle.
Replacing High Mounted Stop Lamp
bulb (bulb type)
1. Open the tailgate.
2. Remove the mounting screws of
both sides of the service cover
using a Philips screwdriver.
3. Remove the three round head cap
nut fixing the high mounted stop
lamp using a wrench.
4. Pull out the high mounted stop
lamp assembly and unplug the
connector.
To Next Page
Loading...
