Kia SELTOS - Page 29

ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
27
AUDIO SYSTEMS
AUDIO
SYSTEMS
Voice Recognition and Phone Contact Tips
The system may have difficulty understanding
some accents or uncommon names. Improve
the performance by making a few simple
changes to your phone contacts, listed below.
To help optimize the Bluetooth
®
Wireless
Technology Voice Recognition system, see
other tips and reminders under Quick Tips:
• Use full names (first and last names) vs.
short or single-syllable names (“John
Smith” vs. “Dad," “Smith Residence” vs.
“Home”)
• Avoid using special characters, emojis or hyphenated names (@, &, #, /, -,
*, +, etc.)
• Avoid using acronyms (“In Case of Emergency” vs. “ICE”) or words with
all capital letters
• Spell words completely, no abbreviations (“Doctor Smith” vs. “Dr. Smith”)
• Bluetooth
®
Music Streaming: If the Bluetooth
®
music is inaudible or too low, turn up
the volume on the connected phone
• When placing a call, speak in a natural, moderate tone, with clear pronunciation.
The system may have trouble recognizing commands if you speak too softly or
too loudly
• Always wait for the beep before speaking any commands
• Close windows and sunroof and turn off A/C. The noise from an A/C fan operating
at higher speeds or wind noise from open windows or sunroof can interfere with
Voice Recognition
• Press the talk button and say “Help” to get a list of available commands
QUICK TIPS
•
• During the pairing process, be sure to accept the connection requests on the phone
for phone book download and to allow acceptance of all future Bluetooth
®
connection
requests
• The system can register or pair multiple Bluetooth
®
devices. See the Car Infotainment
System Quick Reference Guide for more information on setup and limitations
QUICK TIPS
Bluetooth
®
Wireless Technology
†5,21
(continued)
Pairing a Phone
For instructions on how to pair a phone, refer to the audio system’s
user’s guide or your vehicle’s Quick Start Guide.
How to Place a Call
When using the voice command feature, wait for the system BEEP
before speaking the command.
There are two options for placing a call using the Steering Wheel
controls:
• Option 1: Press the Receive/Place Call button
C
(system displays
the call history with the most recent calls)
• Option 2*: Press the Talk button
A
(system will BEEP to indicate it
is ready for call placement). Then say the command “Call {name}” or
“Dial {number}”
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Voice Recognition Tips
Video