Kia Stinger 2023 - 僅 High Beam Assist (HBA)

Features of your vehicle
1124
Lighting
WARNING
For your safety, change the Settings
after parking the vehicle at a safe loca
-
tion.
High Beam Assist operation
Display and control
僅 After selecting 'High Beam Assist' in
the Settings menu, High Beam Assist
will operate by following the proce
-
dure below.
- Place the headlamp switch in the
AUTO position and push the head
-
lamp switch towards the instrument
cluster. The High Beam Assist ( )
indicator light will appear on the
cluster and the function will be
enabled.
- When the function is enabled, high
beam will turn on when vehicle
speed is above 25 mph (40 km/h).
When vehicle speed is below 15
mph (25 km/h), high beam will not
turn on.
- The High Beam ( ) indicator
light will appear on the cluster
when high beam is on.
僅 When High Beam Assist is operating,
if the headlamp switch or switch is
used, the function operates as follow:
- If the headlamp switch is pulled
towards you when the high beam is
off, the high beam will turn on with
-
out High Beam Assist canceled.
When you let go of the headlamp
switch, the switch will move to the
middle and the high beam will turn
off.
- If you push the light switch towards
the instrument cluster, high beam is
turned on and High Beam Assist is
released.
- If the headlamp switch is placed
from AUTO to another position
(headlamp/position/off), High
Beam Assist will turn off and the
corresponding lamp will turn on.
僅 When High Beam Assist is operating,
high beam switches to low beam if
any of the following conditions occur:
- When the headlamp of an oncom
-
ing vehicle is detected.
- When the tail light of a vehicle in
front is detected.
- When the headlamp or tail light of a
motorcycle or a bicycle is detected.
- When the surrounding ambient
light is bright enough that high
beams are not required.
- When streetlights or other lights are
detected.
High Beam Assist malfunction
and limitations
High Beam Assist malfunction
When High Beam Assist is not working
properly, the 'Check High Beam Assist
(HBA) system' warning message will
appear on the cluster (turns off after a
OCK040554L