55
5
5
Driving your vehicle Forward Collision-Avoidance Assist (FCA) (Sensor fusion)
FCA stands for Forward Collision-Avoid
-
ance Assist.
Detecting sensor
[1]: Front view camera, [2]: Front radar
Refer to the picture above for the
detailed location of the detecting sen
-
sors.
Take the following precautions to main
-
tain optimal performance of the detect
-
ing sensor:
僅 Never disassemble the detecting sen
-
sor or sensor assembly, or apply any
impact on it.
僅 If the detecting sensors have been
replaced or repaired, have your vehi
-
cle inspected by an authorized Kia
dealer.
僅 Never install any accessories or stick
-
ers on the front windshield, or tint the
front windshield.
僅 Pay extreme caution to keep the front
view camera dry.
僅 Never place any reflective objects (i.e.
white paper, mirror) over the dash
-
board. Any light reflection may pre
-
vent the function from functioning
properly.
僅 Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard, near the front
radar cover.
僅 Always keep the front radar and cover
clean and free of dirt and debris. Use
only a soft cloth to wash the vehicle.
Do not spray pressurized water
directly on the sensor or sensor cover.
僅 If unnecessary force has been applied
to the radar or around the radar, For
-
ward Collision-Avoidance Assist may
not properly operate even though a
warning message does not appear on
the cluster. In this case, have your
vehicle inspectedby an authorized Kia
dealer.
僅Use only genuine parts to repair or
replace a damaged front radar cover.
Do not apply paint to the front radar
cover.
To Next Page
Loading...
