Kicker LX Series - LX Stereo; Specifications

30English
LX Stereo
Specifications
Note: All specifications and performance figures are subject
to change. Please visit www.kicker.com for the most
current information. To get the best performance from
your new KICKER amplifier, we recommend using genuine
KICKER speakers, accessories and wiring.
Model: LX500.4
Dynamic Power [Watts] 1100W
RMS Power Output [Watts]
@ 14.4V, 4Ω stereo, ≤ 1% THD+N
@ 14.4V, 2Ω stereo, ≤ 1% THD+N
@ 14.4V, 4Ω mono, ≤ 1% THD+N
125W X 4 AMP1, AMP2
225W X 4 AMP1, AMP2
450W X 2
Frequency Response [Hz] 20Hz–20KHz
Selectable Electronic Crossover Selectable Crossover Slopes:
12dB and 24dB (Linkwitz-Riley);
12, 18 and 24dB (Butterworth)
AMP1, AMP2 Off/HP/LP/BP
(LX Control Center HP 20Hz-5KHz, LP 40Hz–5KHz)
Fader On/Off Switch Yes
Remote Bass Control No (Incompatible)
Length [in, cm] 9 7/16, 24
Height [in, cm] 2 3/8, 6
Width [in, cm] 8 7/16, 21
Signal-to-Noise Ratio [dB]
Signal-to-Noise Ratio [dB]
>95dB, a-weighted, re: rated power
>75dB (ref: 1W output)
Input Sensitivity Low Level: 125mV–5V
High Level: 1V–40V