49English
Use the knobs to set your crossover points,
between 20Hz–5kHz HP/BP and 40Hz–
5kHz LP for full-range channels.
X-OVER TYPE: Select the amplifier
channel for which you’d like to change
the crossover type. Press the X-OVER
TYPE button to choose Linkwitz-Riley or
Butterworth. Each amplifier channel may
have its own crossover type.
X-OVER SLOPE: Select the amplifier
channel for which you’d like to change the
crossover slope. Press the X-OVER SLOPE
button to choose between the available
slope options. Each amplifier channel may
have its own crossover slope. The available
slopes are - Linkwitz-Riley: 24dB, 12dB
Butterworth: 24dB, 18dB, 12dB
TIME DELAY: The Time Delay will delay
the left channel of the stereo outputs up
to 10ms, in increments of 0.1ms. This will
allow you to set the center stage according
to your preferences and listening position.
Channel Mode | Phase: Use the Channel
Mode button with a full-range stereo
amplifier channel to change the selected
channel output to stereo, L+R Summed, or
L-R Summed.
To Next Page
