Kicker LX Series - Page 6

6English
Note: All specifications and performance figures are subject
to change. Please visit www.kicker.com for the most
current information. To get the best performance from
your new KICKER amplifier, we recommend using genuine
KICKER speakers, accessories and wiring.
Model: LX1650.1 LX3000.1
Dynamic Power [Watts] 2200W 3800W
RMS Power Output [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
@ 14.4V, 1Ω mono, ≤ 1% THD+N
550W X 1
1000W X 1
1650W X 1
1100W X 1
2000W X 1
3000W X 1
Length [in, cm] 9 7/16, 24 12 5/8, 32
Specifications Common to All Models
Frequency Response [Hz] 10Hz–160Hz
Selectable Electronic Crossover Variable LP 40Hz–160 Hz
Parametric Bass Boost Yes, 0–+6dB, Variable Center 20Hz–80 Hz
Variable Bandwidth 1–5
Variable Subsonic Filter Variable Hi-Pass 10Hz–80Hz
Remote Bass Control Yes (Included)
Height [in, cm] 2 3/8, 6
Width [in, cm] 8 7/16, 21
Signal-to-Noise Ratio [dB]
Signal-to-Noise Ratio [dB]
>95dB, a-weighted, re: rated power
>75dB (ref: 1W output)
Input Sensitivity Low Level: 125mV–5V
High Level: 1V–40V