17 18
#0004
USB
When the USB cable is connected, "USB"
appears on the full screen of the display
unit. You cannot operate any button at this
time.
The driver installation automatically starts.
When the connection is complete, the
screen displays the serial number of the
product on the display unit.
"Lumitester" is displayed and it is ready for
measurement after countdown.
The product displays USB on its status
indicator.
It allows automatic synchronization of time
and date and timestamping of measurement
data.
• For details of the software, refer to Help.
• Use the USB cable provided for the product.
• Insert the batteries before connecting the product with a PC.
• The display panel shows "USB" and key operation is disabled while the product is
connected to a PC. When you pull out the USB cable, the display "USB" is cleared
and the power is turned o.
• Close the USB cover securely when the USB cable is not connected.
Caution
USB
Re-connection to PC once connected
#0004
USB
Double-click "Lumitester.exe" to run the
Software.
Follow the instructions of the Software to
display the Home Screen.
On the login screen, type in your ID and
password to log in.
On the Home Screen, connect the product
and your PC via the USB cable.
When the connection is complete,
"Lumitester" is displayed and it is ready for
measurement after countdown.
The product displays USB on its status
indicator.
To Next Page
Loading...
