Kikkoman Lumitester Smart - Switch Sensitivity (Switch Sensitivity Adjustment); Contrast (Display Contrast Adjustment); Information (Product Information); Data Clear (Measurement Data Deletion)

29 30
 Press and hold the Power button for 5 seconds or
longer and display the Setup screen. Then press
Up/Down button to select "Switch sensitivity" and
press START.
 Press Up/Down buttons to adjust the switch
sensitivity.The adjustment range is 1 to 10.
Pressing START adjusts the sensitivity and returns to
the Setup screen.
 Press and hold the Power button for 5 seconds or
longer and display the Setup screen. Then press
Up/Down button to select "Contrast" and press START.
 Press Up/Down buttons to adjust the contrast. The
adjustment range is 1 to 10.
Pressing START adjusts the sensitivity and returns to
the Setup screen.
5-4. Switch Sensitivity (Switch sensitivity adjustment)
You can adjust sensitivity of START and Up/Down buttons.
5-5. Contrast (Display contrast adjustment)
You can adjust the contrast of the display panel.
 Press and hold the Power button for 5 seconds
or longer and display the Setup screen. Then
press Up/Down button to select "Information".
 Press and hold the Power button for 5 seconds
or longer and display the Setup screen. Then
press Up/Down button to select "Data Clear"
and press START.
 Select Yes using Up/Down buttons, and press
START. All the past measurement data will be
deleted.
5-6. Information (Product information)
You can view product serial number, Software version (Ver.FW), and Bluetooth software
version (BLE).
5-7. Data Clear (Measurement data deletion)
You can delete all data.
Data Clear
No
Yes
Switch
sensitivity
3
Switch
sensitivity
3
Information
1901 05313 0001S
Ver.FW100 BLE100
Contrast
10
Contrast
10
Data Clear
No
Yes