33 34
5 seconds after the remaining battery level displays
low battery, the power is automatically turned o.
Replace with new batteries.
The clock count continues for 60 seconds after
removing the batteries. Please replace the batteries
within 60 seconds.
Press "PUSH" to deploy the stand.
Remove the battery cover.
Insert two new size AA alkaline batteries
or two charged size AA nickel-hydride
batteries, paying attention to polarities.
Replace the battery cover.
6-3. Replacement of batteries
7 Troubleshooting
Error code displays for indicating operation mistakes and problems.
When abnormality is observed, turn o the power immediately,
and remove the batteries as soon as possible.
Disconnect the USB cable if being used, and then remove the
batteries.
When abnormality is observed such as malfunction, burning
smell, fuming etc., there is a danger of re and burst. Make sure
that fumes are extinguished, and contact the dealer or us. Never
repair the product by yourself, as this is very dangerous.
Warning
• Do not mistake the polarities of batteries.
• Do not mix batteries of dierent manufacturers or models, or new and used batteries.
• Do not use an alkaline battery after its validity date has expired.
• Follow the instruction manual for the batteries used.
• Size AA batteries back up the clock of the product. When the batteries are dead or
removed while the power is on, the clock may be initialized. In this case, adjust the
clock.
• Conform to disposal regulations established by local governments when disposing of
batteries.
• Remove the batteries when the product is to be stored for an extended period of time.
Failure to do so may cause liquid leak and burst.
Caution
To Next Page
Loading...