Organic
solvent
5 6
1-3. Operation button
Power button (side)
Turns ON/OFF the product’s power
or displays the setup menu.
Up/Down button
Used to select a setup item or
view past data.
START button
Starts measurement and
determines the input.
To adjust the sensitivity of the START and/or up/down buttons, refer to "5-4. Switch
sensitivity" (
P29).
2
For safe and proper use
Please read this section carefully beforehand to use the product correctly. The
warning messages listed here indicate important safety issues as well as failures and
malfunctions.
Do not disassemble or
remodel the product.
Fire, electric shock, or
failure may occur.
Do not expose the
instrument to water or
operate it with wet
hands.
Failure to do so may
cause electric shock or
malfunction.
Do not use batteries
other than the specied
ones (size AA alkaline
batteries or charged size
AA nickel-hydride
batteries).
It could cause re, injury,
or failure.
Remove the batteries
when the product is to
be stored for an
extended period of time.
Failure to do so may cause
liquid leak and burst.
Do not place the
product where it gets
hot (near the re, near
the heater, or under the
scorching sun).
Fire, burn, or failure
may occur.
Do not push nor rub
the display and
operation panel with
hard or sharp objects.
Injury or failure may
occur.
Do not apply organic
solvent to clean the
product.
Fire, electric shock, or
failure may occur.
Do not use nor store the
product exposed to
direct sunlight, dust,
and/or high
temperature/humidity.
Fire or failure may occur.
• As the START and up/down buttons adopt electrostatic capacity switches, they may
not react when operated by a wet hand or through a thick glove.
Caution
Failure to properly handle the product may lead to injuries or damages.
Caution
Indicates what must NOT be done to use the product.
Prohibited
Caution
This product is designed for ATP Swab Test. Do not use this product for any other use.
Please read carefully for proper usage of the product.
To Next Page
Loading...
