Connect Lumitester
Select the Lumitester to connect. If the Lumitester was connected
before, you can select it from the list of completed pairings. To connect
a new Lumitester, update the unconnected Lumitester and select one.
Paired Lumitester
#0004
BLE
13 14
Select the product's serial number on the
application screen.
It allows automatic synchronization of time
and date and timestamping of measurement
data.
When the connection is established, the
product displays BLE on the status indicator.
The Application displays the Home Screen
and the smartphone/tablet and the product
are ready to use.
• While the communication distance using Bluetooth technology is approximately
up to 10m, it may vary due to obstacles (e.g. human body, metal, wall) and/or
radio wave conditions.
• Bluetooth communication can be used with this product only with the dedicated
application.
For details of the Application, refer to Help.
To connect the 2nd and subsequent smartphones and/or tablets, refer to "5. Product
Setup" "5-1. BLE Pairing Mode (Connection to 2nd or later smartphone/tablet)"(
P25).
Caution
Connection between smartphone and/or tablet and the product
for the 2nd time onward
On the Application's Home Screen, open
the menu.
Select the icon to display the connection
screen with the product.
Press and hold the product's Power button
for a while.
When "Lumitester" is displayed, it is ready for
measurement after countdown.
When the connection is established, the
product displays BLE on the status indicator.
When the application displays the Home
Screen the smartphone/tablet and the
product are ready to use.
The Application screen shows the serial
numbers. Selecting a serial number of a
product you wish to connect starts
connection.
#0004
BLE
Connect Lumitester
Select the Lumitester to connect. If the Lumitester was connected
before, you can select it from the list of completed pairings. To connect
a new Lumitester, update the unconnected Lumitester and select one.
Paired Lumitester
To Next Page
Loading...
