Kikusui PLZ-U Series Operation Manual

Secure adequate
space
around the power switch.
Do not
place the PLZ-U
in a location
that
would result in poor accessibility to the
switch. And, do
not place
objects near the switch that would result
in poor accessi-
bility.
Do not place
objects
on
the PLZ-U.
Placing objects on top of
the PLZ-U can cause failures (especially heavy
objects).
Do
not
place the
PLZ-U
on an inclined surface or location
sub-
ject to vibrations.
The
PLZ-U may fall
or tip over causing damages and
injuries.
Do not use
the PLZ-U in a
location where strong
magnetic or
electric fields
are nearby or a
location where
large amount of
distortion and
noise is present on the
input power supply
waveform.
The
PLZ-U may
malfunction.
Do not use
the PLZ-U
near highly sensitive
measuring instru-
ments or
transceivers.
The noise
generated by
the PLZ-U may affect them
2.3
Precautions
When Moving
the PLZ-U
When
moving or
transporting the PLZ-U to the
installation site,
observe the follow-
ing precautions.
Turn off the
POWER switch.
Moving the PLZ-U
while the
power
is
turned on can cause
electric shock
or damage
to it.
Remove all
wiring.
Moving the PLZ-U
with the
cables
connected
can cause
wires
to break
or injuries
due to
the PLZ-U falling
over.
PLZ-U
Installation and
Preparation
2-5

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English