Kikusui PLZ-U Series Operation Manual

3.1
Front
Pane
^WARNING
Do not touch the load input terminal while
the PLZ-U
is turned
ON, as it
may lead to electric
shock. In addition,
be sure
to use the
load input
termi-
nal cover.
•
The load input terminals on the front and rear
panels
are coupled
inside
the
PLZ-U,
A voltage applied to
one end
will appear
at the other end.
SSSU®!
.
Qo not connect equipment to the load input terminals on the front
and rear
panels simultaneously, as it can cause damage.
'
Be
sure to attach the blank
panels
to unused slots.
•
Avoid using the PLZ-U in a dusty environment or an environment with
poor
ventilation.
•
Do not obstruct the air inlet on
the front
panel and the
air
outlet on the rear
panel.
3.1.1 Frame
[11]
Setting display
[12]
Unit indicator
[13-1]SW
[13]
[13-2]SEQ
[13-3]STORE
^xr.
I
Rotary knob
/
[14]A,B,C
[8’
A
I
SHIFT
[16-1]
SLEW RATE/
[16]
S.STAT
[16-2] OCP/OPP
[17-1] EXT
[17]
[17-2]
RMT
[17-3] KEY LOCK
[18-1] RECALL/STORE
[18]
[18-2] ENTER
[18-3]
LOCAL/
\
KEY LOCK
V
[18-4]
CLEAR/CONFIG
Fig.3-1 Frame front panel
3-2
Names and Functions of Parts PLZ-U

Kikusui PLZ-U Series Specifications

General

Brand	Kikusui
Model	PLZ-U Series
Category	Control Unit
Language	English