EasyManua.ls Logo

KiloVault HLX+ Series - Specifications; 7.1 Electrical All Models

KiloVault HLX+ Series
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7. Specications
These are HLX+ specifications not settings. Please see the Operation section for charger and oth-
er equipment settings.
7.1 Electrical All Models
24
Specication Value
BMS Type Switching Shunt Resistor
Eciency 94.50%
Estimated number of cycles at 100% DoD until 80% of
rated watt hour capacity remains
2000
Estimated number of cycles at 80% DoD until 80% of
rated watt hour capacity remains
5000
High Voltage (Overcharge) Shuto Protection ≈15 ±0.12 V (3.75±0.03 V / cell)
High Voltage Shuto Release Discharge below ≈14.4 ±0.2 V (3.60±0.05 V / cell)
Low Voltage (Over-discharge) Shuto Protection ≈10.2 ±0.2 V (2.50±0.05 V / cell)
Low Voltage Shuto Release Charge above 11.2V ±0.4 V (2.80±0.10 V / cell)
Maximum Conguration - With Bridge - Any Tempera-
ture Conditions
Up to 4 parallel strings of 4 batteries in series.
Total of 16.
Maximum Conguration - Without Bridge - Temperature
falls below freezing
Up to 4 batteries in series OR 4 batteries in parallel but
not both. Total of 4 batteries.
Maximum Conguration - Without Bridge - Temperature
never falls below freezing
Up to 4 parallel strings of 4 batteries in series.
Total of 16.
Maximum Time Between Charges 6 Months
Minimum Cell Balancing Voltage 3500 mV/Cell
Normal Self-Discharge Current ≤20 mA
Peukert Coecient 1.05
Rated Voltage 12.8 VDC

Related product manuals