New :
This function allows to register a new campaign of measures. It is necessary to enter first of all the name
of the file (12 characters at most). B and validate every
character by pressing on the knob or by choosing the symbol if you enter less than 12 characters.
Choose then if you wish a manual or automatic recording of the data (by means of the knob).
validate as many points as you wish by pressing on the knob (the number of
registered points is indicated on the last line). Press on the key "Recording" to stop the recording. If you
really wish to stop, choose "Yes" and to continue to register points, click on "No" (by means of the knob).
- Manual recording :
rowse the letters by scrolling down the knob
9
- Automatic recording: By means of the knob, choose the interval of time between the recording of
each of the points (the minimum is of 5 seconds). Choose then the duration on which points are going to
be registered (validate the number of days, hours and minutes) then validate. The recapitulative
appears on the screen. To begin the recording, press twice on the knob. Once the ended recording, the
device switches of. To stop the current recording, press on "Recording". If you really wish to stop,
choose "Yes" and to continue the recording, click on "No" (by means of the knob).
KIMO provides a one-year guarantee, starting from the date on which the appliance was originally
purchased, that any new appliance will be free of any manufacturing or structural defects. This guarantee
does not cover defects resulting from incorrect handling or from any repairs which may been made by
persons other than the manufacturer.
Any defects covered by this guarantee will be repaired free of charge. An estimate will be provided for any
damage not covered by this guarantee. The customer’s prior approval will be requested before any repairs
are done.
KIMO will see to the replacement of any constituent parts of this appliance.
Any appliance, whether under guarantee or not, must be returned carriage paid. A letter detailing the faults
defected should be sent with the appliance whenever possible.
All KIMO devices are calibrated in our premises and supplied with a calibration certificate, as per the AFNOR
FD X 07-012 norms, in accordance with the National Standards.
In order to comply with standards of Quality Assurance, measuring devices should be checked annualy.
Print :
When "Print" is validated, by means of the knob, choose the campaign which you wish to print and
validate by pressing on the knob. Go out of the menu "printing" by pressing on " ESC ".
To restore the data registered on a PC, s (without any probe) and connect the cordon
on the port USB (see p. 3). During the recordings, the automatic stop of the device does not work,
but at the end of the procedure, it will switch off automatically.
witch on the device
GUARANTEE
CALIBRATION
Delete :
This function allows to delete the campaigns of measure stored in the device. To enter in the menu
“delete”, validate by pressing on the knob. Then, always by means of the knob, choose to cancel or to
confirm the demand.
To Next Page
Loading...
