Kimo MP 202 - Pressure Menu; Units; Automatic Average; Point by Point Average

When you access to the menu pressure, an autozero is automatically made, then you can read at the center
of the screen the measured value. The last line of the screen shows the next menu (
):
- Autozero
- Units
- Integration
- Point by point average
- Automatic point by point average
To validate a function, press on the knob when the wished function is shown on the screen.
browsing the menu by
scrolling down the knob
- Automatic average
- Air velocity with Pitot
- Air velocity with Debimo
- Air flow with Pitot (rectangular, circular)
- Air flow with Debimo (rectangular, circular)
- Air flow with K Factor
Autozero :
To realize a manual autozero, press on the knob when the scrolling down menu displays “autozero”.
Units :
See p. 5
Point / point average :
See p. 6
Automatic point / point average :
See p. 6
Integration :
The coefficient of integration allows to smooth the measure, to avoid the inconvenient variations. To
enter a coefficient, use the knob to make scroll down figures from 0 to 9 and validate by pressing on the
knob.
Coefficient 0: no integration, important fluctuation in the shown measure.
Coefficient 9: maximal integration, more stable reading (recommended coefficient of integration).
4
PRESSURE MENU
Automatic average :
See p. 5
Air velocity with Pitot :
See p. 7
Air velocity with Debimo :
See p. 7
Air flow with Pitot :
See p. 6
Air flow with Debimo :
See p. 6
Air flow with K Factor :
See p. 7