Kinetico Premier Plus - Installation Instructions; Locate and Prepare Unit; Test Incoming Water Pressure; Plumbing and By-pass Assembly

Kinetico Premier Plus Water Softener Installation and User Manual
12
Installation instructions
Locate:
a: Ensure the unit can be
positioned on a flat surface.
b: If sand, silt or turbidity are
present in the water supply, a
pre-filter should be installed
before the water softener.
1
Test water pressure:
Test incoming pressure to the
unit. A pressure regulating valve
will be required if the pressure
is above 6 bar.
2
Install:
Plumb pipework as necessary to
accommodate a by-pass assembly.
3
1
2
3
4
5
6
0
bar