4. Screen dormant
The screen will be turned off automatically after the time you set. After turning off, the screen
will reduce power consumption. The camera still works while the display screen is turned off.
Just click the screen and it will turn on.
Options: Off /1 MIN /3 MINS
Default setting: 1 MIN
5. Light source frequency
Choose the right frequency to reduce screen flickering.
Options: 60 Hz / 50 Hz
Default setting: 60Hz
6. Impact sensitivity
When the sensitivity mode is turned on in the video recording mode, if an impact or sudden
braking is detected, it will automatically start recording a 20-second video and save the content.
The videos will be locked in the front or rear emergency video folder and will never be overwritten
by new video files.
The higher the sensitivity level, the easier it is to trigger the emergency recording.
Options: Off/low/medium/high
Default setting: Low
33
To Next Page
Loading...
