Note:
➀ Please charge the dash cam for 30 minutes before using it. When charging,
please turn off the camera by long pressing the power button.
➁ Kindly refrain from connecting the camera to your PC for charging purposes.
Please utilize the 110V wall outlet instead.
3.2 Turn your camera ON/OFF
Auto Power ON:
KINGSLIM D5 dash cam is designed to turn ON automatically when it receives power,
i.e. when the car engine is started.
Auto Power OFF:
The camera is also pre-configured to turn OFF automatically within a few seconds
when the power gets disconnected, i.e. when the car key is turned to the LOCK
position.
4. Install the hardwire kit
This camera comes equipped with a built-in battery designed specifically for parking
mode. To activate parking mode, it is necessary to leave the dash cam plugged in.
However, this can result in battery drain. For this reason, we highly recommend
installing a hardwire kit for your dash cam.
Installing the hardwire kit not only helps prevent the camera battery from draining
the car battery thanks to its smart low voltage protection system but also provides
a continuous and stable power supply.
Kind reminder: For your safety, we strongly advise that you have a professional
installer handle the hardwire kit installation.
To Next Page
Loading...
