Tip: If the dash cam no longer records, please back up your data and format the
memory card, or replace it with a new one.
3. Time Lapse: Off (default), 1 fps, 2 fps, 3 fps.
This camera is capable of recording time lapse video. Before that, you need to install
a hardwire kit on your dash cam. Once that's done, the camera will capture a series
of still images at a set interval and then combine them into a video montage.
4. G-Sensor: Off, Low (default), Medium, High
When G-sensor mode is enabled during video recording, your dash cam will
automatically start recording an emergency video and save the content if it detects
sudden braking or an impact. The video will then be locked and stored in the Lock
file, preventing it from being overwritten by new video files. By selecting a higher
sensitivity level, your dash cam will be more likely to detect smaller impacts and
trigger emergency recording.
Note: The video length depends on the option you selected for Loop Recording.
5. Parking Mode: Off (default), Low , Medium, High
When the car engine is off, the dash cam will enter parking mode automatically. If
an impact or sudden braking is detected during parking, the dash cam will automat-
ically start recording a 15-second video and save the content. The video will be
locked in the Lock file, preventing it from being overwritten by new video files. By
selecting a higher sensitivity level, your dash cam will be more likely to detect
smaller impacts and trigger emergency recording.
Setup
Resolution
Loop Recording
Time Lapse
4K P30
1 Min
Low
Off
G-sensor
Resolution
1 Min
2 Mins
3 Mins
To Next Page
Loading...
