12. Record Audio: Off, On (default)
You can choose to record video with or without audio.
13. Speaker: Mute, Low, Middle, High (default)
This option allows you to adjust the speaker's volume.
14. Boot Sound: Off, On (default)
The sound that the camera makes during boot-up.
15. Key Sound: Off, On (default)
The sound that the camera makes when you press the buttons.
16. Screen Saver: Off (default), 30 Seconds, 1 Minute, 2 Minutes.
The camera screen will automatically turn off to save battery life after the set time.
To turn on the display again, simply press any buttons.
17. License: Off (default), On
This option allows you to input the license plate information into the dash cam.
18. Frequency: 60Hz (default), 50Hz
It refers to the frequency of the alternating current (AC) that is used in most
electrical power systems around the world. We recommend you keep the default
setting.
19. Date / Time: MM/DDYY
Please manually set the date and time according to your region. The dash cam will
ten display the correct date and time.
20. Date Stamp: Off, On (default)
When Date Stamp is enabled, a time and date watermark will be added to the video
or photo.
21. Language: English (default), Français, Español, Deutsch, Italiano, 简体中文, 繁體
中文, 日本語, 한국어, Российский.
You can set the system language for your dash cam.
To Next Page
Loading...
