Kingtex CT9000 Series User Manual

6-3. 穿線 Threading
要得到最佳的縫製效果，縫線的收放量是一個重要的環節，縫製過程裡斷線、跳針、線跡不穩定
等不良現象，錯誤的穿線是其中一個原因，請依照穿線圖正確的穿線。ABC為擊針線，Ｄ為上裝
Threading should be made correctly, please refer referring to the illustration,
improper threading might caused skip stitch, thread breakage and uneven tension.
A,B,C．．． needle thread, D．．． top cover thread, E．．． looper thread,
the threading for three needle machine is shown in the illustration below. For two
needle machine, threading is the same except two needle thread. When using cotton
tread or nylon thread, the threading is different from other kinds of threads, please
refer to the diagram below.
A
B
C
D
E
A
D
E
A
C
B
B
C
When woolly thread used.
用在伸縮尼龍線
飾線，Ｅ為下勾線，當下勾針線使用棉線或伸縮尼龍線時，其穿線方法有所不同，如圖所示。
由於某一些因素，導致對縫製效果產生影響，如裁片的厚度及質料、縫線種類及粗細、線跡寬窄的要求
、進給率大小的變化.........等等，故必須經過試車調整後才能找出最佳的縫製效果。
7. 與縫製有關的各項調整 Proper operation adjustment
Due to some reasons will affect the sewing effects. such as thickness of sewing fabrics, different kinds of sewing
threads and its thickness requirements for narrow on wider stitches, the changes of feed ratio etc. Thus, machines
must be adjusted and test running first in order to obtain the best sewing effects.

Kingtex CT9000 Series Specifications

General

Brand	Kingtex
Model	CT9000 Series
Category	Sewing Machine
Language	English