As you turn the T1 knob clockwise within that
random section, it increases the probability of
smaller subdivisions being used. Depending on your
loop length, 1/8 and 1/16 can sound a little harsh, so
by keeping the knob slightly counter-clockwise from
100% you can dial them out if you want to.
Standard Repeater — Only samples new audio when the
Touch footswitch is being pressed.
Resampling Repeater — Can sample audio by detecting
transients, like a snare hit or a pick attack. Hands-free!
With Standard Repeater, the random section of T1
picks a random subdivision each time the Touch
footswitch is pressed. With Resampling, it picks a
random subdivision each time a transient is detected.
S
T
A
N
D
A
R
D
R
E
S
A
M
P
L
N
G
100% LOOP,
NO DRY SIGNAL
EQUAL MIX INPUT
AUDIO AND LOOP
100% LOOP,
NO DRY SIGNAL
T2 — Controls the wet/dry mix of repeated audio and
toggles between Standard or Resampling options.
19
To Next Page
Loading...
