Speed knob (bottom-left)
The speed of each track can vary continuously from
approximately 0.5x to 2x. Track speed impacts how
long your loop can be:
• 0.5x = 40 seconds max loop time (fully
counter-clockwise)
• 1x = 20 seconds max loop time (12 noon)
• 2x = 10 seconds max loop time (fully clock-wise)
Record multiple layers of sound by overdubbing on
a single track or recording to a new track.
Overdubbing allows you to add new layers that stay
synchronized with the original loop, but you can't
undo any mistakes. Recording to a new track
allows you to clear a loop if you make a mistake, but
it may eventually drift out of sync with other tracks.
If you’d like to sync your tracks to an external
device, you can do so using MIDI clock (see our
online manual for more info).
Stop / erase loops
To erase a single track, toggle to the track you want to
clear then hold down the push button and tap Touch.
To erase all tracks simultaneously, hold down the push
button for 3 seconds while on any track.
If you want to “stop” a track without erasing it, just turn
the volume for that track all the way down.
25
To Next Page
Loading...
