Volume knob (top-right)
This one is easy. You get a volume control for each
looper track.
1x SPEED,
20 SEC MAX LOOP TIME
~2x SPEED,
10 SEC MAX LOOP TIME
~0.5x SPEED,
40 SEC MAX LOOP TIME
Immediately after recording to a loop, the sound will
play back at the same pitch. If you turn up the speed
knob, the pitch will increase and your loop will become
shorter. Likewise if you decrease speed, the pitch will
decrease and your loop will become longer.
Direction knob (top-left)
Track direction works just like a tape player that’s
capable of bi-directional recording. It can be used to
reverse the playback direction of any particular loop.
Try recording to a loop, then change its direction.
It will play in reverse. Now if you overdub, the new
audio plays forward while the original loop still plays
in reverse.
If you switch directions again, the original loop will
play forward while the new audio plays in reverse.
26
To Next Page
