6
-21MAINTENANCE
(1) Clamp (2) Hose
CHECKING RADIATOR HOSE
AND CLAMP
Check to ensure the radiator hoses are
free from damage and are tightened
properly every 200 hours or every 6
months, whichever comes first.
1. If the hose clamps are loose or wa-
ter leaks from hose, tighten clamps
securely.
2. If the radiator hoses are swollen,
hardened, cracked, or otherwise
damaged, you must replace the
hoses. Failure to do so could lead
to coolant loss and engine damage.
S43O630A
(1) Power Steering Oil Line
1. Check to see that all hydraulic lines
and hose fittings are tight and
undamaged.
2. If damage is found you should re-
place the hose at once.
POWER STEERING LINE
PRECAUTION AT OVERHEATING
Take the following actions in the event
the coolant temperature reaches the
boiling point, what is called
"Overheating".
1. Stop the machine in a safe place and
keep the engine idling.
2. After 5 minutes of unloaded idling,
shut the engine down.
3. Once the engine cools off, inspect
for a cause for overheating. Once
repairs are completed, refill with
coolant and restsrt the engine. Re-
fer to the “Troubleshooting
Section”.
S43O631A
It is a good practice to replace the ra-
diator hoses every two years.
To Next Page
Loading...
