Kioti DK90 - Operating the P.t.o; Using 3-Point Hitch

DK90 1 -10
3. Before installing or using P.T.O
driven equipment, read the
manufacturer's manual and review
the safety labels attached to the
equipment.
4. When operating stationary P.T.O
driven equipment, always apply the
tractor parking brake and place
chocks behind and in front of the rear
wheels. Stay clear of all rotating
parts.
(1) 3-Point Hitch Lowering Speed Knob
(A) "SLOW" (B) "FAST"
USING 3-POINT HITCH
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch
usage.
2. When using a 3-point hitch mounted
implement, be sure to install the
proper counterbalance weight on the
front of the tractor.
3. When transporting on the road, set
the implement lowering control in the
"LOCK" position to hold the imple-
ment in the raised position.
(1) P.T.O Shaft Cover
(2) P.T.O Shaft Cap
OPERATING THE P.T.O
1. Make sure the tractor is completely
stopped, gears are in neutral and all
moving components have com-
pletely stopped before connecting,
disconnecting, adjusting, cleaning or
servicing any P.T.O driven
equipment.
2. Keep the P.T.O shaft cover in place
at all times. Replace the P.T.O shaft
cap when the shaft is not in use.
S43O121AS43O120A S43O122A