6
-10 DK90
INITIAL 50 HOURS
CHANGING ENGINE OIL
(1) Oil Inlet (2) Gauge
(A) Oil level is acceptable within this range
(3) Drain Plug
1. To drain the used oil, remove the
drain plug at the bottom of the en-
gine and drain the oil completely into
the oil pan.
All the used oil can be drained out
easily when the engine is still warm.
2. After draining reinstall the drain plug.
3. Fill with the new oil up to the upper
notch on the dipstick.
To avoid personal injury:
Be sure to stop the engine be-
fore changing the oil.
Allow engine to cool down
sufficiently, oil can be hot and
can burn.
Oil capacity with filter
!!
!!
!
CAUTION
S43O609A
S43O610A
CHECKING HEAD LIGHT,
HAZARD LIGHT ETC.
1. Inspect the lights for broken bulbs
and lenses.
2. Replace if broken.
CHECKING GAUGES, METER
AND EASY CHECKER
1. Inspect the instrument panel for bro-
ken gauge(s), meter(s) and Easy
Checker lamps.
2. Replace if broken.
CHECKING SEAT BELT AND
ROPS
1. Always check condition of seat belt
and ROPS attaching hardware be-
fore operating tractor.
2. Replace if damaged.
2.38 U.S.gal.
(9.0
l
)
To Next Page
Loading...
