4
-5DESCRIPTION OF OPERATING SYSTEM
When the hazard lamp switch is pushed
to the on position, the hazard lamps
blink.
HAZARD LAMP SWITCH
(1) Hazard Lamp Switch
(A) Hazard Lights ON (B) Hazard Lights OFF
Prolonged use will result in bat-
tery drain. Therefore, use only
when conditions require hazard
light. Therefore, it must be used
only in case of emergency.
!!
!!
!
CAUTION
S43O406A
PTO CHANGE SWITCH
(MANUAL/AUTO)
Shift the PTO Switch to OFF position
prior to starting the engine. If not, the
engine will not start. When the PTO
change switch is shifted to the AUTO
position, PTO will be activated only with
the implement in the low position. For
example, if the implement is being lifted
during working, PTO stops. When the
PTO switch is shifted to the manual
position, PTO is activated continually.
S43O429A
(1) PTO Change Switch
To Next Page
Loading...
